Voice Archive

  • For us engineers that only occasionally do an install in Germany or Austria in terms of telephony this could be describe as Dante Alighieri’s trip through the 9 circles of […]

    Austrian and German Overlap mode

    For us engineers that only occasionally do an install in Germany or Austria in terms of telephony this could be describe as Dante Alighieri’s trip through the 9 circles of […]

    Continue Reading...

  • If 9 for outside line is been removed on CUCM then need to add TP on GW to remove it in SRST Mode voice translation-rule 50 rule 1 /^9\([2-8].....$\)/ /\1/ […]

    SRST Template

    If 9 for outside line is been removed on CUCM then need to add TP on GW to remove it in SRST Mode voice translation-rule 50 rule 1 /^9\([2-8].....$\)/ /\1/ […]

    Continue Reading...

  • Download the wsdl file from CUCM 8 https://[server_IP_Address]:8443/realtimeservice/services/RisPort?wsdl Create the following folder tree or something like it Alexis |downloads -|Ris8Service.wsdl -|axis-1.0.jar -|lib —-|axis-1.4.jar —-|commons-logging-1.1.ja —-|commons-discovery-0.2.jar —-|jaxrpc-1.1.jar —-|saaj-1.1.jar —-|wsdl4j-1.4.jar —-|activation-1.1.jar —-|mail-1.4.jar […]

    Getting Java file from WSDL from CUCM 8

    Download the wsdl file from CUCM 8 https://[server_IP_Address]:8443/realtimeservice/services/RisPort?wsdl Create the following folder tree or something like it Alexis |downloads -|Ris8Service.wsdl -|axis-1.0.jar -|lib —-|axis-1.4.jar —-|commons-logging-1.1.ja —-|commons-discovery-0.2.jar —-|jaxrpc-1.1.jar —-|saaj-1.1.jar —-|wsdl4j-1.4.jar —-|activation-1.1.jar —-|mail-1.4.jar […]

    Continue Reading...

  • Open hrcConfig.ini file in notepad located in C:\Program Files\Cisco UCCX Historical Reports and increase AuthReqTimeOut to 30 and tracing level to 5. So should look like this AuthReqTimeOut=15 [LOG] ; […]

    UCCX historical Report Tool “Error 5049”

    Open hrcConfig.ini file in notepad located in C:\Program Files\Cisco UCCX Historical Reports and increase AuthReqTimeOut to 30 and tracing level to 5. So should look like this AuthReqTimeOut=15 [LOG] ; […]

    Continue Reading...

  • This application is for updating extension/directory numbers in CUCM 8.x/9.x. Currently there is no way of doing this using “Bulk Tool”. If you need to move a set of extension/directory […]

    Update Extension/Directory numbers in CUCM

    This application is for updating extension/directory numbers in CUCM 8.x/9.x. Currently there is no way of doing this using “Bulk Tool”. If you need to move a set of extension/directory […]

    Continue Reading...