Polycom with CM 7

Wireless Survey
Base station has to register with WLC before it starts omitting a signal
On the handset (7000) dial *99989* to turn phone into survey mode.
2nd value is the quality value. This cannot drop below 52
3nd value is the signal strength value. Take the measurement next to the repeater/base station. This cannot drop more then 25 from that measurement.

Repeater Position
A Repeater can only synchronise to one Base station.
Where the repeater is position the Signal strength cannot be below 25 from the measurement at the base station.
Where the repeater is position the Q value must be high and stable.

Base Station

About Alexis Katsavras

Working as Freelance Cisco Unified Communications Consultant in the UK. www.NetPacket.co.uk